• Provides thermal insulation
• Adheres to most substrates
• Prevent CUI (Corrosion Under Insulation)
• Provides personnel protection
• Increases efficiency and saves energy
• Vapor retardant
• Rapid application procedure reduces man-hours necessary for installation compared to conventional insulation
• Extremely lightweight
• Class A Fire Rating

Uses:

• Tanks
• HVAC
• Boilers
• Cookers
• Pressure Valves
• Piping
• Heat Exchangers
• Steam Lines
• Processors
• Vats
• Heaters
• And much more¡­

-PHYSICAL DATA :

1. Solids: By weight 63.6% / By Volume: 68%

2. 30-60 minutes to tack free at 70F (21C)

3. Overcoat: 2 hours when 70F (21C) at 40% Relative Humidity

4. Full Cure: 21 days Lead and chromate free Cures by evaporation

5. Weight: 11.88 lbs. per gallon

6. Vehicle Type: Urethane/Acrylic blend

7. Shelf Life: Up to 3 years if unopened under

8. Appropriate storage conditions (See MSDS).

9. VOC Level: 21 grams/liter. Viscosity: 105 ¨C 110 KU; pH: 8.5¨C9.0

10. Maximum Surface Temperature when applying: 150F (65C)

11. Minimum Surface T emperature when applying: 40F (5C)

12. Maximum Surface T emperature after curing: 300F (149C)

TESTS AND CERTIFICATIONS :

1. Exterior insulation against Solar Radiation-benet comparable to R 19

2. (Guarded hot box; ASTM C236)

3. Blocks 99.5% of infrared / up to 68% sound blockage

4. Factory Mutual approval

5. ICC-ES Legacy Approval

6. UL (Underwriters Laboratory) approved

7. Flame Spread Test (ASTM E84; 0 smoke, 0 ame)

8. Class ¡°A¡± Flame Spread

9. Marine Approvals: - American Bureau of Shipping; USCG; IMO; DNV;

10. USDA Approved

11. Flexibility (ASTM E1737): 180 degree bend ¨C passed

12. Adhesion (ASTM B3359): Rated a 5B

13. Perm Rating (ASTM E96): 8.8 average

14. Abrasion Resistance (ASTM D4060): 3,000 cycles 15. Resistance to Salt Spray: 2,000 hours 16. Resistance to Wind Driven Rain (ASTM E514)

Where good ideas come to the surface